This week, according to manufacturer DT Swiss, there have been reports of failures in ERC/CRC/HEC model series rims with certain IDs. The problems occurred in products produced since 1 September 2024, with no previous incidents in older products. In the reported cases, delamination of the rims occurred, which compromises safety and poses a risk of accidents. Customers should not use the affected products and dealers should withdraw them from circulation. An ongoing investigation is trying to determine the cause. Manufacturers and dealers will be informed of the necessary measures.
Here we show the official recall in full.
DT Swiss recall
Dear DT Swiss customers,
This week we have received a limited number of reports of failures in products from the ERC/CRC/HEC with rim heights of 35 and 45 mm model range and DT Swiss ID higher than 2750000 received.
In the cases affected, the wheel rims failed. We immediately launched a comprehensive investigation to determine the cause, which is still ongoing. As things stand, the reports relate exclusively to Products manufactured and delivered from 1 September 2024. Wheels with this type of rim have been successfully on the market for several years without any comparable reports.
In the reported cases, spontaneous delamination (separation of the carbon fibre layers) of the rim flange occurred, which significantly impaired the structural integrity (stability) of the wheel. Due to this damage, there is an increased risk of accidents that could lead to property damage, serious injury or death. As a precautionary measure and in the interests of consumer safety, we ask all customers to stop using the affected products and all distributors, manufacturers and retailers to immediately withdraw the affected products from sale. This Stop Use Notice will remain in effect until the cause is fully resolved. A step-by-step guide can be found below.
We have The affected bikes have been delivered to various bicycle manufacturers and brands as well as retailers and are currently informing them about the safety notice. As soon as the test results are available, we will inform our customers of the necessary measures, which may range from inspection to product replacement.
Affected products
Affected are bikes that have been 1 September 2024 were manufactured and supplied from the following products:
DT Swiss standard products
ERC with rim profile 35mm & 45mm
CRC with rim profile 35mm & 45mm
HEC with rim profile 45mm
Only wheels with a DT Swiss ID number from 2750000 and higher are from this Utilisation ban affected. All other products are not affected.
DT SWISS ID
The DT Swiss ID is a unique alphanumeric labelling of a product that is assigned by us as the manufacturer. It is attached to the product with a tamper-proof sticker and consists of a QR or dot code and a 7-digit identification number.
Where is the DT Swiss ID on my bike?
The DT Swiss ID sticker can be found in three places on the rim.
If you have any questions about the safety notice, need help checking whether your bikes are affected or suspect damage, please contact https://www.dtswiss.com/recall. We will keep you informed of the latest results and progress on our dedicated website www.dtswiss.com/recall.
It will soon also be possible to check serial numbers electronically and register your contact and product data in order to be informed automatically about further steps. DT SWISS AG Längfeldweg 101 CH-2504 Biel/Bienne 12.07.2025 PAGE 2/2
We know that you have the highest expectations of us and our products. We apologise for the inconvenience caused and assure you that we are doing everything we can to resolve this situation as quickly as possible.
Step-by-step instructions from DT Swiss
- Do not ride your DT Swiss product until the following two points have been checked
- Consult the website https://www.dtswiss.com/recall and check whether you have an ERC/CRC/HEC with a rim height of 35 or 45 mm.
- Check your DT Swiss ID (see separate guide to checking the DT Swiss ID on the website above) if the number is higher than 2750000. Only products with a DT Swiss ID greater than 2750000 may be affected.
- If you do not have an ERC/CRC/HEC wheel (with a rim height of 35 or 45 mm) or your DT Swiss ID is lower than 2750000, you can ride your DT Swiss product without restrictions.
- If you are not sure which DT Swiss product it is, cannot find the DT Swiss ID or have other questions, please contact DT Swiss Support by e-mail recall@dtswiss.com
- Alternatively, you can contact DT Swiss Support as indicated below. Phone: Europe (GMT+2) Time: 09:00 - 12:00 & 13:30 - 17:00 Languages: German & English Free hotline: +800 0000 1994 (in specific countries) Phone: +41 32 344 62 44 (subject to charge)
